| E10 |
- Shering counting
- Automatic compensation for backgauge screw deviation
- Indication of one-way positioning of backgauge
- Soft positioning limit of backgauge
- Built-in-time relay
- Freely setting of proportional factors
- Conversion between metric and inch
- Power-failure position memory
|
| DAC310 |
 |
- High resolution LCD display, 275iÁ48
- Backgauge control
- Gap or angle controlling
- Stroke travel limitation
- Simultaneous display of real position and the programmed value of backgauge
- Shear counting
- 100 procedures, each 25 sequences
- Panel base housing
- Servo, frequency inverter drive or two speed AC motor control are customized options
|
| DA41 |
 |
- Ram stroke control
- Backgauge control
- Angle programming
- Setting of tolls parameters
- Retraction control
- 100 programs, each 25 sequences
- Panel based housing
- Servo, frequency inverter drive or two- speed AC motor control are customized options
|
| DA56 |
 |
- 10,4” TFT color display
- 2D graphical programming
- Bending sequence determination
- Crowning control for anti-deflection
- Plate unbending length calculation
- USB interface
- Panel based housing
- Servo, frequency inverter or AC motor control
|
| DA66We |
 |
-
- 12” TFT color display, 800iÁ600
- Built in PLC to reduce cables and increase reliability
- Compatible design of electrics, housing dimensions to DA-6X series
- Standard Windows suite
- 2D graphical programming
- 3D visualization in production mode
- Bending sequences and bending pressure automatically calculated
- Angle refined
- Plate unbending calculation
- Compensation table control
- 600MHz microprocessor
- 128MB memory capacity
- Products and tools memory 64MB
- USB keyboard & mouse interface
(2 USB interface)
- Multi languages
- Servo, frequency inverter and AC motor control
- PDF viewer
- Touch screen optional
|
| DA69We |
 |
-
- 12” TFT color display, 800iÁ600
- Built in PLC to reduce cables and increase reliability
- Compatible design of electrics, housing dimensions to DA-6X series
- Standard Windows suite
- 3D and 2D graphical programming
- 3D visualization in production mode
- Touch pad pointing device
- Bending sequences and bending pressure automatically calculated
- 3D graphical acceleration
- 2 HSB interface
- Angle correction database
- Plate unbending calculation
- Compensation table controlling
- 600MHz microprocessor
- 128MB memory capacity
- Products and tools memory 64MB
- USB keyboard & mouse interface
(2 USB interface)
- Sensor bending and correction interface
- Multi languages
- Servo, frequency inverter and AC motor control
- PDF viewer
- Touch screen optional
|
|
| E200 |
- Bright LCD display, 240iÁ128
- Multiple working steps programmed at one time and executed automatically, continuous positioning available
- Automatic retraction to avoid possible impacts between workpiece and backgauge
- One side positioning, screw gap is eliminated
- Inch/mm selection
- Position compensation
- Stock counter
- Automatic searching for reference points and power down position memorization are alternative options
|
| DAC360 |
 |
| |
- High resolution bright LCD display, 4.7” screen
- Panel based housing
- Backgauge control
- Retract function
- Rake angle control
- Blades gap control
- Stroke travel limitation
- Manual movement of axes
- Plate pressing force control
|
| DA52 |
 |
- 6,4” LC, true-color, TFT display
- Max 4 axes control (X, Y1, Y2, C)
- Parameter programming in one page
- Button of guide menu
- Anti-deflection table control
- Tools, material and products library
- 30 top punch and 30 bottom die
- USB data store
- 266MHz processor
- Power failure memory
- Inch/mm selection
- Built-in PLC
- Multi Language
- Panel based housing
- Advanced Y axis control algorithm for controlling closed-loop valve and open-loop valve
- Servo, frequency inverter or AC motor control
|
| |
| DA65We |
 |
- Modularized structure, flexible combination of multi axes, max. 24 axes
- Built in Plc to reduce cables and increase reliability
- Compatible design of electrics, housing dimensions to DA-6X series
- Standard Windows suite
- 10.4” color LCD TFT color display, 800iÁ600
- 2D graphical programming
- 3D visualization in production mode
- Bending sequences and bending pressure automatically calculated
- Angle refined
- Plate unbending calculation
- Compensation table control
- 600MHz processor
- 128MB storage
- Tools library:30 top punch/60 bottom die
- USB keyboard & mouse interface
- Multi languages
- Servo, frequency inverter and AC motor control
|
| |
|
